Home / Materials Listed in this section are all the materials we have on hand for cutting your shapes. Some are basic materials, such as hardwood and plywood, while others are two-layered such as the microlaminate acrylics. These will allow you to  cut a shape and engrave a design by removing the thin top layer, exposing the alternate color underneath. All the materials are divided up into their main categories. Each description details the material type, available thicknesses and maximum available sizes. Some materials are limited stock and may need to be ordered in. Occasionally we have one-off sheet materials that come through our doors that we are able to offer for a limited time only. Once we run out, we can’t guarantee we’ll be able to get more. These materials can include wood, paper, countertop laminates and more, and are listed in their own category. Materials that are out of stock are marked as such. Materials marked with an E can also be engraved. Baltic birch plywood, our most popular material, is almost always in stock in several thicknesses. Copyright (c) 2011 Faberas Laser Arts - All Rights Reserved Sample Material Projects These are examples of projects created using shapes from our library and cut using the available materials we have on hand. Several of these shapes have been detail engraved. Each sample also lists the shape and material stock number. Dragon in gold microlaminate (AN047D, MAT-ML-EGD)